Mini-led spotlight with
Magnetic base
Model 95799
asseMbly and operation instructions
Duetocontinuingimprovements,actualproductmaydifferslightlyfromtheproductdescribedherein.
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
to preVent serious injury, read and understand
all warnings and instructions before use.
©
®
Copyright 2007 by Harbor Freight Tools . All rights reserved. No portion of
this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.
fortechnicalquestionsorreplacementparts,pleasecall1-800-444-3353.
6. disconnect the power cord plug from the power source before making any
adjustments, changing accessories, or storing the spotlight. always unplug
the spotlight from its electrical outlet before performing any inspection, main-
tenance, or cleaning procedures.
7. store an idle spotlight out of reach of children and other untrained persons.
This product is dangerous in the hands of untrained users.
8. check for breakage of parts, and any other condition that may affect the spot-
light’s operation. if damaged, have it serviced before using. Many accidents
are caused by poorly maintained products.
9. tool service must be performed only by qualified repair personnel. Service or
maintenance performed by unqualified personnel could result in a risk of injury.
10. when servicing a tool, use only identical replacement parts. follow instruc-
tions in the “Inspection, Maintenance, And Cleaning” section of this manual.
Use of unauthorized parts or failure to follow maintenance instructions may create a
risk of electric shock or injury.
11. Maintain labels and nameplates on the tool. These carry important information.
If unreadable or missing, contact Harbor Freight Tools for a replacement.
12. never leave the spotlight unattended when it is plugged in. Turn off the Spotlight,
and unplug it from its electrical outlet before leaving.
13. never look directly into the spotlight.
14. do not allow the spotlight to be exposed to fire or high heat as this may result
in an explosion.
15. when in use, the product will become hot. Do not leave hot product on dashboard
or on seats.
16. warning: the brass components of this product contain lead, a chemical
known to the state of california to cause birth defects (or other reproductive
harm). (california health & safety code § 25249.5, et seq.).
unpacKing
When unpacking, check to make sure that the item is intact and undamaged. If any
parts are missing or broken, please call Harbor Freight Tools at the number shown on the
cover of this manual as soon as possible.
asseMbly instructions
warning! Make sure the Power Switch of the Spotlight is in its “OFF” position
and that the it is unplugged from its electrical outlet before making any adjustments
to the Spotlight.
1.
2. Your Mini-LED Spotlight comes completely assembled. Instructions on replacing the
Fuse are outlined below.
reV 07f
for technical questions, please call 1-800-444-3353.
SKU 95799
Page 3
replacing the fuse
Car Adapter with Cord (14)
Spring (16)
Fuse (15) F2A250V
Car Adapter Tip (17)
Car Adapter
Threaded End (18)
Figure 1
1. Unscrew the Theaded End (18) from the Car Adapter with Cord (14) as shown in
Figure 1.
2. Pull out the Fuse (15) from the Car Adapter and Cord (14). The Fuse compartment
also includes one Spring (16) and one Car Adapter Tip. These may come out when
removing the Fuse (15).
3. The Fuse (15) is a F2A250V amp fuse. Do not replace with a different size fuse,
as this may result in excessive heat and explosion, destroying the Spotlight and
resulting in injury.
4. Insert the Spring (16), and replace the Fuse (15). Set the Car Adapter Tip (17) over
the Fuse and into the Theaded End (18) of the Car Adapter with Cord (14). Screw
Threaded End (18) back onto the Car Adapter.
for technical questions, please call 1-800-444-3353.
SKU 95799
Page 4
operation instructions
Lamp Ring (1)
Magnetic Base (12)
Figure 2
1. Your Mini-LED Spotlight has a Magnetic Base (12) which can be mounted to any
metal surface-see Figure 2.
2. The Spotlight cord extends out to 6’-9” from the Car Adapter. Gently pull on the Car
Adapter with Cord (14) to extend the cord. To draw the cord back into the housing,
turn the Lamp Ring (1) counterclockwise-see Figure 2.
Magnetic Base (12)
Switch Button (9)
Figure 3
3. The Spotlight can be set to four different lighting functions: Rapid, Interval, Constant,
or Off. Flip up the Magnetic Base (12). Push the Switch Button (9) located beneath
the Magnetic Base (12) to rotate through each function-see Figure 3.
4. To operate the Car Adapter with Cord (14), plug it into your the lighter socket. Leave the
Car Adapter with Cord (14) plugged in while using the Spotlight from your vehicle.
for technical questions, please call 1-800-444-3353.
SKU 95799
Page 5
inspection, Maintenance, and cleaning
warning! Make sure the Power Switch is in its “OFF” position and that the
Spotlight is unplugged from its power source before performing any inspection,
maintenance, or cleaning procedures.
1.
2. before each use, inspect the general condition of the Spotlight. Check for loose
screws, misalignment or binding of moving parts, cracked or broken parts, damaged
electrical wiring, and any other condition that may affect its safe operation. do not
use damaged equipment.
3. Store the Spotlight in a dry location out of direct sunlight. Keep the Spotlight out of
the reach of children.
4. Clean with a soft cloth. Do not use flammable liquids or harsh detergents to clean the
Spotlight. Do not use a course cloth as this will damage the lens. Do not submerge
in fluid to clean.
warranty
LIMIted 90 dAy
wArrAnty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability
standards, and warrants to the original purchaser that this product is free from defects in materials and
workmanship for the period of ninety days from the date of purchase.This warranty does not apply to damage
due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities,
or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for
incidental, contingent, special or consequential damages arising from the use of our product. Some states
do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of
exclusion may not apply to you.THiSWarranTy iS expreSSly in lieu oF all oTHerWarranTieS,
expreSS or implied, inCluding THe WarranTieS oF merCHanTabiliTy and FiTneSS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges
prepaid. proof of purchase date and an explanation of the complaint must accompany the merchandise. if
our inspection verifies the defect, we will either repair or replace the product at our election or we may elect
to refund the purchase price if we cannot readily and quickly provide you with a replacement.We will return
repaired products at our expense, but if we determine there is no defect, or that the defect resulted from
causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to
state.
for technical questions, please call 1-800-444-3353.
SKU 95799
Page 6
parts list
part
description
Q’ty
part
11
description
Q’ty
1
Lamp Ring
1
1
1
1
1
1
1
1
1
1
Rear Cover
1
1
1
1
2
Glass
12
Magnetic Base
Right Housing
Car Adapter with Cord
Fuse F2A250V
Spring
3
Reflector
13
4
Circuit Board 1
Circuit Board 2
Upper Cord Reel
Switch
14
5
15
6
16
1
1
1
7
17
Car Adapter Tip
Threaded End
8
Lower Cord Reel
Switch Button
Left Housing
18
9
10
asseMbly and parts diagraM
Parts 15, 16, 17 and 18 shown
in Figure 1 on page 4.
please read the following carefully
for technical questions, please call 1-800-444-3353.
SKU 95799
Page 7
|